Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Round Rock
Duct repair and sealing in Round Rock typically runs $280-$720 for most residential systems, with flex-duct collar repairs and full mastic sealing on older two-story homes landing in the middle of that range. We’re CleanRun Air Duct Cleaning Austin, and our crews work Round Rock five days a week - dispatch and scheduling run from our Austin office, but the trucks that roll through Brushy Creek, Forest Creek, and Round Rock Ranch are stocked with mastic, collar clamps, and HEPA filtration units sized for the flex-duct systems that dominate this market. Call (737) 243-9544 and you’ll reach a live person who can book a free estimate, usually within 48 hours.
Round Rock isn’t a drive-by market for us. We’ve been documenting the inside of duct runs here since 2013, and the photo records from this city tell a specific story: original flex-duct systems installed during the Dell-era building boom are now hitting the 20-30 year mark, and attic conditions here punish them harder than almost anywhere else in Texas.
Why CleanRun Air Duct Cleaning Austin Is Round Rock’s Preferred Duct Repair & Sealing Company
Our reputation in Round Rock was built one written price and one photo record at a time. We’ve served over 52,000 homes since 2013, and the Round Rock jobs are among the most documented in our system - not because we’re more careful here, but because the conditions demand it. Customers in Brushy Creek and Forest Creek subdivisions regularly tell us they chose us after a competitor’s “cleaning” left them with dust puffing from registers. We show them the camera footage of detached collar liners and explain why source removal without sealing first made the problem worse.
Response time to Round Rock is typically next-day or within 48 hours for standard duct repair and sealing estimates. We’re not going to manufacture urgency - this is scheduled work, and we’d rather do the inspection right than rush it.
Local knowledge matters here in ways that don’t apply to cooler markets. Our technicians know that a flex-duct inspection in a Round Rock attic in July is a 140°F environment that changes how materials behave. They know that the December-February Ashe juniper pollen surge loads duct systems with allergen concentrations that don’t occur in Austin’s southern suburbs. And they know that subdivisions like Round Rock Ranch were built fast, with builder-grade materials, and that the insulation wrap on those flex runs is often compromised in predictable patterns after two decades of thermal cycling.
Haven Standard Clause 3: Verified Crews means every technician is background-checked, uniformed, and identified by name before arrival. Tomas Reyes, who leads CleanRun, established that standard in 2013 and has maintained it across every market we serve.
Our Duct Repair & Sealing Services in Round Rock

Duct Sealing with Mastic Sealant
Mastic sealing is the backbone of what we do in Round Rock. The metal-backed mastic we apply at joint connections, collar interfaces, and plenum seams cures to a flexible, permanent seal that outlasts tape by a decade or more. In Round Rock’s two-story homes with flex-duct systems in unconditioned attics, mastic is non-negotiable - the thermal expansion and contraction of duct materials here breaks down lesser seals within a season or two. We apply mastic after camera-verified inspection of every connection point, and we photograph the sealed joints as part of the Documented Photo Record included on every visit.

Flex Duct Repair
Flex duct repair is where Round Rock’s housing stock and climate converge into a specific technical problem. The inner liner of flex duct - the actual air channel - is held to supply-boot collars by mechanical clamps and adhesive. After 20-30 years in Round Rock attics that exceed 140°F for six or more months annually, that adhesive degrades and the liner separates. Our crews working Brushy Creek subdivisions find this so routinely that we’ve made pre-clean duct integrity inspection a mandatory step, not an optional add-on. We re-secure detached liners with new collars and mechanical fasteners, seal with mastic, and only then proceed with any source removal. The alternative - running agitation tools through a compromised duct - pushes debris into your living space every time the blower cycles.

Metal Duct Repair
Metal duct systems are less common in Round Rock’s dominant 1990s-2000s subdivisions, but they appear in some custom builds and in older sections of the city. Where we find galvanized steel ductwork with seam separation or corrosion, we repair with sheet-metal patches, drive screws, and mastic sealant. The same thermal cycling that degrades flex-duct adhesives can loosen longitudinal seams in metal duct over time. We inspect with borescope cameras before quoting any metal duct repair, and the written price covers the full scope - no per-foot add-ons.

Duct Insulation
Duct insulation in Round Rock is often the missing piece that undoes otherwise good sealing work. The builder-grade insulation wrap on flex-duct systems in Round Rock Ranch, Forest Creek, and Brushy Creek is commonly compromised after two decades - torn, water-stained, or compressed to the point of uselessness. Sealing a duct without addressing the insulation means the conditioned air you’re paying to cool is bleeding heat back into the attic before it reaches your registers. We replace compromised insulation with new wrap rated for Texas attic conditions, sealed at seams with appropriate tape and mastic, so the thermal barrier matches the air barrier.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Round Rock
Our equipment roster includes professional-grade systems from Rotobrush, Nikro, Abatement Technologies, Honeywell, and Aprilaire - brands you can look up independently before you agree to any work. For Round Rock customers, this means we’re not improvising with consumer-grade hardware. The HEPA filtration units we deploy on duct repair jobs are Abatement Technologies machines designed for contained-source removal. The mastic sealants we use are rated for the temperature extremes of Central Texas attics. We stock collar clamps, flex-duct replacement sections, and insulation wrap sized for the systems found in Round Rock’s dominant housing stock, so most repairs don’t wait on parts orders. Guardsman protective materials keep your floors and finishes clean while we work.
Common Duct Repair & Sealing Problems We See in Round Rock Homes

- Detached flex-duct liners at supply-boot collars. In Brushy Creek and Forest Creek subdivisions, our camera inspections routinely reveal the inner liner has separated from the collar after years of 140°F+ attic heat cycling. This gap allows conditioned air to leak into the attic and, during cleaning, lets dislodged debris escape into living spaces.
- Compromised insulation wrap on 20-30 year old flex runs. The original insulation on Round Rock Ranch-era duct systems has often been damaged by roof leaks, rodent activity, or simple compression. Without intact insulation, mastic-sealed joints still lose thermal efficiency - condensation forms on cool ducts in humid attics, and the mastic deteriorates.
- Shared return-air and dryer-vent stacks in denser apartment and condo communities. Round Rock’s growth included multi-family construction with common risers. A unit-by-unit approach misses the shared pathway where lint and debris actually accumulate. We inspect and, where accessible, seal and clean these common stacks to prevent cross-unit contamination.
- Ashe juniper pollen loading in return-air pathways. The December-February mountain cedar season deposits allergen concentrations in Round Rock that exceed almost anywhere else on record. This pollen infiltrates through compromised return ducts and lodges in debris - standard cleaning without sealing the return pathway first just redistributes it.
Pricing for Duct Repair & Sealing in Round Rock, TX
Here’s what duct repair and sealing actually costs in Round Rock’s market:
- Flex-duct collar re-attachment and mastic sealing (1-3 boots): $280-$420
- Full supply-duct mastic sealing on typical two-story system: $480-$650
- Return-duct sealing with HEPA-contained source removal: $380-$520
- Duct insulation replacement (per run, materials included): $180-$290
- Complete flex-duct run replacement (damaged beyond repair): $340-$580 per run
- Whole-system inspection, sealing, and documented photo record: $680-$920
These are whole-system prices, agreed in writing before any work starts - Haven Standard Clause 1. We don’t quote per-vent or per-foot. The final price depends on what the camera shows: how many collars are detached, how much insulation needs replacement, whether the plenum itself has separated at the air handler. Every estimate is free, and every written price is backed by our Free Second Opinion policy - bring a competitor’s quote and we’ll put our number next to it.
Homes in Round Rock’s older subdivisions often land in the upper half of these ranges due to the cumulative effect of two decades of attic heat cycling. That’s not an upsell. It’s what the photo record shows, and we’ll show you before we quote.
We Also Serve Cities Near Round Rock

Our crews work throughout the northern Austin metro, including Duct Repair & Sealing in Round Rock and surrounding communities. We regularly schedule jobs in Pflugerville, Hutto, Cedar Park, and Leander - each with its own housing stock patterns and duct system profiles. If you’re in one of these areas, the same written-price-first, photo-record-delivered standard applies.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Round Rock

Because detached flex-duct liners are common here after 20-30 years of 140°F+ attic heat cycling, and running agitation tools through a compromised duct pushes debris into your living space instead of capturing it under negative pressure. At a two-story builder-grade home off Forest Creek Drive, our tech found the flex-duct inner liner had separated from the collar at three supply boots visible through camera inspection; rather than running agitation tools and negative pressure first, we sealed the detached sections with mastic and re-clamped collars while the HEPA filtration unit held the return side, then completed source removal across the supply and return ducts with the system sealed. The homeowner had been seeing visible dust puff from registers every time the blower motor kicked on - after the repair-and-seal, the registers ran clean through the rest of the cooling season. Call (737) 243-9544 for a free inspection.
Yes, and we approach these differently than single-family homes. Shared return-air and dryer-vent stacks in Round Rock’s denser multi-family communities create cross-unit lint pathways that a unit-by-unit cleaning misses. We inspect the common riser where accessible, seal accessible joints with mastic, and document what we find. The scope and price are written before any work starts, and we coordinate with property management when needed. Call (737) 243-9544 to discuss your building’s specific configuration.
Yes - it makes sealing the return-air pathway more critical here than in almost any other U.S. market. The December-February mountain cedar season generates pollen concentrations in Round Rock that exceed recorded levels in most other cities, and this allergen infiltrates through gaps in return ducts, lodging in debris that standard cleaning redistributes. Sealing returns before any source removal prevents this infiltration and protects the work we do. The 365-Day Done Right Promise covers our sealing work if pollen loading reveals a gap we missed. Call (737) 243-9544 for an estimate before the next cedar season.
We use professional-grade equipment from Rotobrush, Nikro, Abatement Technologies, Honeywell, and Aprilaire - brands you can verify independently before agreeing to any work. For duct repair specifically, this means HEPA-contained negative-pressure units from Abatement Technologies during source removal, mastic sealants rated for Texas attic extremes, and collar clamps and flex-duct materials sized for the systems found in Round Rock’s dominant housing stock. The Documented Photo Record on Every Visit shows exactly what equipment was deployed on your job. Call (737) 243-9544 for specifics on any piece of gear.
Our crews are equipped for the parking constraints common in Round Rock’s denser subdivisions. We use compact negative-pressure units and HEPA filtration systems that don’t require box-truck access, and we coordinate arrival times to minimize disruption. Technicians are identified by name before arrival per Haven Standard Clause 3, and we protect your driveway and landscaping with Guardsman materials. The scope of work and price are agreed in writing before any panel comes off. Call (737) 243-9544 to schedule - we’ll confirm access details when we book.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Austin, serving Round Rock since 2013.




Before
After
Before
After