Air Duct Cleaning in Austin - Flat Price Per System, No Per-Vent Upsells

Air Duct Cleaning in Austin, TX

Whole-home air duct cleaning in Austin typically runs $450-$850 for a standard single-system residence, with most jobs completed in one day. Austin’s combination of mountain cedar pollen, slab-on-slab construction routing all ductwork through 140°F attics, and a cooling season stretching April through October creates contamination cycles faster than more temperate markets. CleanRun crews dispatch from our Austin office to document every duct run with before-and-after photos, and we put a written price in your hand before any panel comes off. Call (737) 243-9544 for a free estimate.

Call (737) 243-9544

Why Austin Homes Are Different

Austin sits at the southeastern edge of the Hill Country, where Ashe juniper releases pollen loads among the densest in North America each December through February. Locals call it “cedar fever,” and HVAC systems running nearly year-round pull this allergen-saturated air through ductwork every winter, creating a recurring contamination cycle absent in Dallas or Houston.

The mid-1990s through mid-2000s building boom produced tract homes with flexible ductwork routed through attics. That stock is now 20-30 years old and has endured repeated summers of 140°F+ attic heat that degrades flex duct connections and insulation wrap. Central Austin neighborhoods like Hyde Park, Travis Heights, and Bouldin Creek contain mid-century pier-and-beam homes with original metal ductwork installed before modern air-sealing standards. Because virtually all Austin homes are built on slab foundations, every duct run lives in the attic, not a conditioned basement, accelerating particulate buildup, mold risk during humid spring storms, and physical deterioration. In late-1990s subdivisions across Pflugerville, Wells Branch, and older Cedar Park, we regularly find flex duct that has partially collapsed at collar connections after years of heat cycling. What’s booked as cleaning often requires repair first.

Our Main Austin Services

Most Austin homeowners who call CleanRun are looking for one of these three services. Each has its own dedicated Austin page with deeper detail.

Air Duct Cleaning in Austin

We clean the full supply and return network with negative-pressure extraction, photographing every duct run before and after. Austin’s year-round HVAC use and cedar pollen loads mean the debris layer builds faster here than in markets with true winter shutdowns. Air Duct Cleaning in Austin covers our full process, equipment, and what the photo record includes.

Dryer Vent Cleaning in Austin

Lint accumulation in dryer vents is a leading cause of house fires nationwide, and Austin’s hard water minerals bond with lint to form dense blockages faster than in soft-water regions. We remove the full obstruction and photograph the vent interior. Dryer Vent Cleaning in Austin has pricing and scheduling detail.

Duct Repair & Sealing in Austin

Attic heat cycling separates flex duct collars and cracks metal seams in older systems. We repair or replace damaged runs and seal leaks with mastic, then verify with pressure testing. Duct Repair & Sealing in Austin explains when repair must precede cleaning.

Before

After

HVAC Cleaning in Austin

Austin’s seven-month cooling season keeps air handlers and coils under near-constant load, compressing the contamination timeline compared to temperate markets. Evaporator coils in attic-mounted systems operate in 140°F ambient temperatures that bake pollen and dust into biofilm, while blowers move that particulate through every room. We clean the full mechanical system, not just the ducts, and document every component. Our HVAC Cleaning hub explains the full scope.

Evaporator Coil Cleaning

Signs you need it

Ice formation on the coil, weak airflow from registers, or a musty odor when the AC cycles on in Austin’s humid spring months.

What it costs in Austin

Evaporator coil cleaning typically ranges $250-$450 depending on accessibility and contamination level.

How we do it

We remove the coil if accessible, apply foaming cleaner, rinse with low-pressure water, and photograph the fin condition before reassembly.

Blower Cleaning

Signs you need it

Vibration or noise from the air handler, uneven airflow between rooms, or dust puffing from registers when the system starts.

What it costs in Austin

Blower cleaning and balancing typically ranges $200-$350 for standard residential units.

How we do it

We remove the blower assembly, clean blades and housing with compressed air and solvent, balance the wheel, and photograph runout before reinstalling.

What HVAC Cleaning Costs in Austin

How do I know if my coil needs cleaning or replacement?

We photograph the coil and measure fin density; if corrosion has destroyed more than 30% of the heat-transfer surface, we show you the image and quote replacement before any work proceeds. Call (737) 243-9544 for a free inspection.

Can HVAC cleaning reduce my summer electric bills in Austin?

A clean coil and blower can improve system efficiency 10-15%, which matters when your AC runs seven months straight; we document before-and-after static pressure to show the improvement. Call (737) 243-9544 for an estimate.

Air Quality & Sanitizing in Austin

Austin’s mountain cedar pollen and humid spring storm cycles create conditions where mold and bacteria colonize duct interiors faster than in drier climates. The same slab-on-slab construction that puts all ductwork in hot attics means there is no basement air buffer to dilute contaminants. We treat biological growth and install preventive equipment, with every step photographed and priced in writing before work starts. Our Air Quality & Sanitizing hub has full equipment specifications.

Mold Treatment

Signs you need it

Visible mold around registers, a persistent earthy odor when the system runs, or allergy symptoms that worsen specifically at home during Austin’s March-May storm season.

What it costs in Austin

Whole-system mold treatment typically ranges $400-$750 depending on colony extent and duct accessibility.

How we do it

We apply EPA-registered antimicrobial through the full duct network, treat the coil and plenum, and run post-treatment air samples to verify reduction.

UV Light Installation

Signs you need it

Recurring mold after professional cleaning, or a household member with immunocompromise who needs continuous air-stream sterilization.

What it costs in Austin

UV-C lamp installation at the coil or air handler typically ranges $350-$600 including hardware and mounting.

How we do it

We size the lamp to your system CFM, install at the coil face or air handler interior, wire to the blower circuit, and photograph placement for your record.

What Air Quality & Sanitizing Costs in Austin

Does UV light actually kill mold in Austin’s humid climate?

UV-C at 254nm destroys mold spore DNA on exposure; we install lamps at the coil face where moisture concentrates, and we photograph the lamp position so you can verify annual bulb replacement. Call (737) 243-9544 for sizing.

Is mold treatment safe for pets and kids?

We use EPA-registered products rated for occupied spaces, ventilate thoroughly after application, and provide the safety data sheet with your job record. Call (737) 243-9544 to review product specifics.

Brands We Service in Austin

CleanRun stocks parts and maintains equipment compatibility with Honeywell, Aprilaire, and Abatement Technologies systems common in Austin’s 1995-2010 housing stock. Most replacement components arrive within 24 hours through our Austin office. See our brands for the full roster.

Pricing for Air Duct Cleaning in Austin, TX

Neighborhoods We Serve in Austin

CleanRun crews dispatch from our Austin office to all corners of the metro. Response time is typically same-week for standard scheduling, with emergency availability for duct collapse or complete airflow loss. We regularly work in:

• Hyde Park
• Travis Heights
• Bouldin Creek
• East Austin (Mueller development area)
• South Lamar (SLA)

Service Area - Cities Near Austin

Our Austin office dispatches crews throughout the northern and eastern metro corridor. We serve Pflugerville, TX where late-1990s subdivisions show widespread flex duct degradation; Cedar Park, TX with its mix of aging and new construction; Manor, TX for growing east-side development; and Round Rock, TX for both historic homes and recent builds. All jobs carry the same written-price guarantee and documented photo record.

FAQs About Air Duct Cleaning in Austin