Air Duct Cleaning in Kyle - Flat Price Per System, No Per-Vent Upsells

Air Duct Cleaning in Kyle, TX

HVAC cleaning in Kyle typically runs $350-$650 for a whole-system service, with most jobs completed in a single visit. We’re CleanRun Duct Repair & Cleaning, and crews dispatch from our Austin office to serve Kyle homeowners with HVAC Cleaning and Air Quality & Sanitizing. Call (737) 243-9544 for a written estimate before any work starts.

Call (737) 243-9544

Why Kyle Homes Are Different

Kyle ballooned from roughly 5,000 residents in 2000 to over 60,000 today, and the vast majority of its housing stock consists of tract homes rushed to market during the 2010s-2020s boom across master-planned communities like Plum Creek, Anthem, and Cross Creek. During that high-volume build-out, ductwork was routinely left open during drywall, texture, and paint phases, trapping fine construction particulate inside systems that homeowners assumed were clean on move-in day. This pervasive post-construction contamination in 5-to-15-year-old homes, not aging infrastructure, is the defining duct issue unique to Kyle’s market.

Kyle also sits squarely in the Ashe juniper pollen corridor blowing east from the Hill Country each December through February, pushing ultra-fine particulate into HVAC intakes that run nearly year-round given the area’s 90-plus-day summers above 95°F. Continuous HVAC operation combined with annual cedar pollen loading means duct systems accumulate allergen buildup faster than in cities east of the I-35 corridor.

Our Main Kyle Services

Homeowners in Kyle call us most often for these three services:

Air Duct Cleaning in Kyle

We clean the full duct network, from return plenum to supply register, using negative-pressure extraction with Rotobrush and Nikro equipment. In Kyle’s newer subdivisions, we routinely find gray drywall-compound dust coating supply boots and flex-duct runs, confirmation that ducts were open during finish-out. Every job ends with a Documented Photo Record of every duct run, before and after. Air Duct Cleaning in Kyle

Dryer Vent Cleaning in Kyle

Lint accumulation in dryer vents is a fire hazard and efficiency drain, especially in Kyle homes where dryers run hard through humid summers. We clear the full vent run from appliance to termination, photograph the obstruction, and verify airflow with a meter reading. Dryer Vent Cleaning in Kyle

Duct Repair & Sealing in Kyle

Kyle’s flex-duct systems, installed under aggressive construction timelines by high-volume builders, often suffer crushed runs, disconnected boots, and leaky seams at plenum connections. We repair or replace damaged sections and seal leaks with mastic and metal tape, then pressure-test to verify. Duct Repair & Sealing in Kyle

Before

After

HVAC Cleaning in Kyle

HVAC cleaning in Kyle addresses a specific problem: the combination of post-construction debris trapped in 5-to-15-year-old duct systems and cedar pollen loading from December through February creates a particulate burden that standard filter changes cannot manage. We use Rotobrush and Nikro negative-pressure systems to clean evaporator coils, blowers, condensers, and air handlers, with every component photographed before and after under Haven Standard Clause 1’s written pricing. HVAC Cleaning service details are available on our hub page.

Evaporator Coil Cleaning

Signs you need it

Ice buildup on the coil, weak airflow from registers, or a musty odor when the AC cycles on in Kyle’s humid summers.

What it costs in Kyle

Evaporator coil cleaning typically runs $180-$320 as a standalone service.

How we do it

We access the coil through the plenum, apply foaming cleaner, rinse with low-pressure water, and photograph the fin condition before and after.

Blower Cleaning

Signs you need it

Vibration or noise from the air handler, uneven heating or cooling across rooms, or dust puffing from registers at startup.

What it costs in Kyle

Blower cleaning typically runs $150-$280 as a standalone service.

How we do it

We remove the blower assembly, clean the wheel and housing with compressed air and solvent, balance the assembly, and photograph runout before reinstallation.

What HVAC Cleaning Costs in Kyle

How do I know my HVAC system was actually cleaned?

Every HVAC cleaning job includes a Documented Photo Record of each component, before and after, delivered to you as part of the standard job record under Haven Standard Clause 1.

Why does my Kyle home need HVAC cleaning more often than my parents’ house?

Kyle’s 2010s-2020s construction boom left drywall dust and construction debris in ductwork that older homes never had, and cedar pollen loads here exceed eastern Hill Country levels.

Air Quality & Sanitizing in Kyle

Air Quality & Sanitizing in Kyle targets the biological load that accumulates in duct systems opened during construction and then sealed with homeowners inside. Cedar pollen provides the organic matter; Kyle’s long cooling season provides the humidity. We treat mold, bacteria, and residual odors, and install UV lights and air purifiers where the source problem is persistent. Air Quality & Sanitizing service details are on our hub page.

Mold Treatment

Signs you need it

Visible growth on registers or inside the plenum, a persistent musty smell when the system runs, or allergy symptoms that worsen at home in Kyle’s humid months.

What it costs in Kyle

Mold treatment typically runs $400-$800 depending on affected duct runs and accessibility.

How we do it

We apply an EPA-registered antimicrobial through the duct system, treat the plenum and boots with contact spray, and photograph all treated surfaces for the job record.

UV Light Installation

Signs you need it

Recurring mold or bacterial growth after treatment, or a household member with compromised immunity who needs continuous air-stream sterilization.

What it costs in Kyle

UV light installation typically runs $350-$600 including the lamp, housing, and electrical connection.

How we do it

We mount a Honeywell or Aprilaire UV-C lamp in the supply plenum, wire to the blower circuit for automatic operation, and verify irradiance with a meter.

What Air Quality & Sanitizing Costs in Kyle

Does UV light actually work in Kyle’s climate?

UV-C lamps sterilize airborne microorganisms passing through the plenum; in Kyle’s long cooling season with near-continuous blower operation, the exposure time is sufficient for meaningful reduction.

Can sanitizing remove construction dust from my Kyle home’s ducts?

No, sanitizing treats biological growth; construction dust requires mechanical cleaning first, which is why we photograph the duct interior to determine the right sequence.

Brands We Service in Kyle

We stock parts and service systems from Honeywell, Aprilaire, and other major manufacturers. Most common components are available same-day through our Austin office, with turnaround on specialty orders typically 24-48 hours. See our brands for the full list.

Pricing for Air Duct Cleaning in Kyle, TX

Neighborhoods We Serve in Kyle

We work across Kyle’s full developed area, with scheduling coordinated from our Austin office and crews routing daily to the city’s master-planned communities. Typical appointment availability is 2-4 business days.

• Plum Creek
• Anthem
• Cross Creek
• Steubing Ranch
• Post Oak

Service Area - Cities Near Kyle

Crews dispatch from our Austin office to serve homeowners throughout the I-35 corridor, including Buda, TX to the north, Austin, TX metro-wide, Manor, TX to the northeast, and Pflugerville, TX to the north. All areas receive the same written pricing, Documented Photo Record, and 365-Day Done Right Promise.

FAQs About Air Duct Cleaning in Kyle